Linsn RV908M32 LED Receiving Card
1) 12 hub75 interface on board(supports 32 scan mode);
2) Single card can output 24 groups RGB data；
3) Supports general driver ICs and most of the PWM driver ICs；
4) In line with EU standards CE-EMC.
1. RV908M32 receiver card have 12 hub75 interface on board(supports 32 scan mode)，no extra hub card needed;
2. Supports 12-bit HDMI colors input (required the 9th generation sending card);
3. Using18-bit signal processor, maximum support 18-bit (260,000) gray (each of red, green and blue);
4. Single card maximum support 1024×768 pixels（Please note that there are recommended values depending on the design of LED screen）；
5. Single card can output 24 groups RGB data；
6. Supports 138 decode, 595 serial decode and so on;
7. Supports pixel-by-pixel brightness and color calibration; single-card color space conversion；
8. High refresh rate and high grey level with most of the driver ICs;
9. Supports general driver ICs and most of the PWM driver ICs;
10. Support hot backup with dual receiver cards for demanding performances screen;
11. Support network cable BER test；
LinsnLED Controller Card System Synchronous and asynchronous
Linsn LED Receiving Card RV908H32 RV908M32
Linsn LED Video Processor X8406 / X8408 / X8414 / X8216 / X8212 / X8208 / X100 / X1000 / X2000 / X8000 / S100 / S3000
Linsn LED Sending Card TS802D / TS921
Linsn LED Sender Box TS16 / TS12 / TS08 / TS852D / TS951 / TS952 / TS952 PLUS / TS962 / 3D260 / TS802D Senders Card
Linsn LED Receiving Card RV320 / RV998 / RV926 / RV908M32 / RV908H32 / RV907H / RV905K / RV905H / RV904 / RV902 / RV901T / RV901H Receivers Card
Linsn LED Receving Card MINI910 / MINI909 / MINI908K / MINI908M / MINI903K / MINI903M / MINI902M / MINI901 Receivers Card
Linsn LED Control Box L1 / L2 / L3 / L4 / L5 / L6 AD Players
Linsn Accessories SC801 / MC801 / CN901 / EB901 / EX906D / EX902D
Linsn Software LEDStudio
Linsn RV908M32 LED Receiving Card
1) 12 hub75 interface on board(supports 32 scan mode);
2) Single card can output 24 groups RGB data；
3) Supports general driver ICs and most of the PWM driver ICs；
4) In line with EU standards CE-EMC.
1. RV908M32 receiver card have 12 hub75 interface on board(supports 32 scan mode)，no extra hub card needed;
2. Supports 12-bit HDMI colors input (required the 9th generation sending card);
3. Using18-bit signal processor, maximum support 18-bit (260,000) gray (each of red, green and blue);
4. Single card maximum support 1024×768 pixels（Please note that there are recommended values depending on the design of LED screen）；
5. Single card can output 24 groups RGB data；
6. Supports 138 decode, 595 serial decode and so on;
7. Supports pixel-by-pixel brightness and color calibration; single-card color space conversion；
8. High refresh rate and high grey level with most of the driver ICs;
9. Supports general driver ICs and most of the PWM driver ICs;
10. Support hot backup with dual receiver cards for demanding performances screen;
11. Support network cable BER test；
LinsnLED Controller Card System Synchronous and asynchronous
Linsn LED Receiving Card RV908H32 RV908M32
Linsn LED Video Processor X8406 / X8408 / X8414 / X8216 / X8212 / X8208 / X100 / X1000 / X2000 / X8000 / S100 / S3000
Linsn LED Sending Card TS802D / TS921
Linsn LED Sender Box TS16 / TS12 / TS08 / TS852D / TS951 / TS952 / TS952 PLUS / TS962 / 3D260 / TS802D Senders Card
Linsn LED Receiving Card RV320 / RV998 / RV926 / RV908M32 / RV908H32 / RV907H / RV905K / RV905H / RV904 / RV902 / RV901T / RV901H Receivers Card
Linsn LED Receving Card MINI910 / MINI909 / MINI908K / MINI908M / MINI903K / MINI903M / MINI902M / MINI901 Receivers Card
Linsn LED Control Box L1 / L2 / L3 / L4 / L5 / L6 AD Players
Linsn Accessories SC801 / MC801 / CN901 / EB901 / EX906D / EX902D
Linsn Software LEDStudio
Get quick response , Share your needs with us, We’ll reply you within 6 hours.
