Novastar DH418 LED Receiver Card 8 HUB75E Output 256×256 Resolution
RGB data: 16 groups of RGB
Onboard: 8 standard HUB75 interfaces
Input Voltage: DC 3.3 V–5.5 V
Rated Current: 0.5 A
Rated Power Consumption: 2.5 W
Humidity: 10% RH–90% RH, non-condensing
Temperature: -25°C–+125°C
Certifications: EMC RoHS CE UL
The DH418 receiving card is a cost-effective receiving card from Novastar technology. The single led card has a maximum load of 256 × 256 pixels and supports up to 16 sets of RGB parallel data.
With 8 standard HUB75 interfaces, it offers high stability and high reliability for a wide range of environments. The hardware design and software design of the DH418 fully considers the scenario of user deployment, operation and maintenance, making deployment easier, running more stable and maintaining higher maintenance.
This receiver card comes with some highly reliable and impressive features to enhance, improve, and advance the graphical outcome of your led display screen. Briefly, you can that this one comes with everything you’d want in your led receiving card.
Support for lighting chromaticity correction
With NovaLCT and NovaCLB, the brightness of each lamp point
Corrected with chromaticity.
fast bright and dark line adjustment
Quickly bright and dark line adjustment on NovaLCT to eliminate
A gap between the light board and the light board, the box body and the box body.
3D function
With independent masters that support 3D capabilities, at NovaLCT or
Turn on the 3D function on the operator panel of the main control and set the 3D parameters.
The number causes the display screen to display a 3D effect.
Loaded:
− 192×256 (PWM IC)
− 176×256 (General Purpose IC)
Mapping function
Target box after enabling Mapping on NovaLCT
The receiving card number and network port information will be displayed, which can be clearly obtained.
Receive card location and routing method.
Receive card pre-stored screen settings
The specified picture can be set to the display on NovaLCT
The screen when the startup screen, network cable is disconnected, or when there is no video source signal.
Temperature and voltage monitoring
Can monitor its own temperature and voltage without the need for other peripherals,
The temperature and voltage of the receiving card can be viewed on the NovaLCT.
LCD module
Supports Nova’s universal 5pin LCD module. For display connection
Card temperature, voltage, single run time and total run time
between.
BER monitoring
With NovaLCT (V5.2.0 and above), the receiving card is connected
During the communication, the data loss on the transmission link is monitored.
Firmware program readback
Can read back the receiving card on NovaLCT (V5.2.0 and above)
The firmware program is saved to the local.
Configuration parameters read back
Readback card configuration parameters can be read back and saved on NovaLCT
Go to the local.
Loop backup
Increase the reliability of the series connection of the receiving card through the master-slave redundancy mechanism.
In the standby line, when one of the lines fails, the other
A line will work instantly to ensure that the display is working properly.
Configuration parameters dual backup
Save two receiving card configurations on the receiving card via NovaLCT
Parameters, one of which is used as a backup parameter.
Dual program backup
The receiving card is shipped with two applications saved in case the program is more
The upgrade caused by the new exception is stuck.
NovaStar LED Controller Card System Synchronous and Asynchronous
NovaStar Taurus Series LED Display Controller TB1-4G / TB2-4G / TB3 / TB4 / TB6 / TB8 With 4G WIFI
NovaStar LED Multi Media Player TB1-4G / TB2-4G / TB30 / TB40 / TB50 / TB60 / TB80 Nova Cloud Service T-series multimedia player MBOX600
NovaStar LED Sending Card MSD300 / MSD600
NovaStar LED Receiver Card MRV208-1 / MRV412 / MRV416 / MRV432 / MRV300 / MRV560 / MRV366 / MRV336 / MRV328 / MRV216 / MRV210 / MRV208 / MRV206 / MRV308 /MRV316 / MRV300-1
NovaStar LED Receiver Card DH7508 / DH7506 / DH7512 / DH7516-N / DH3208 / DH418 / DH426 / DH436 / DH7516 / AT20 / AT30
NovaStar LED Receiving Card A10s-Pro A10s Plus-N / A9s / A8s-N / A8 / A7s Plus / A7 / A5s Plus / A5s / A4s LED Receiving Card of Armor Series
NovaStar MCRTL4K / MCTRLR5 / MCTRL1600 / MCTRL660 PRO / MCTRL660 / MCTRL600 / MCTRL300 / MCTRL700 4K LED Sender Box
NovaStar Video Processor V1260 / V1160 / V1060 / V960 / V900 / V760 / V700 / K16 / K6S / K4S-N LED Video Processor
NovaStar Multi-picture Splicer H15 / H9 / H5 / H2 Video Splicing Processor
NovaStar HDR Master 4K Video Processor VS0 / VS1 / VS2 / VS3 / VS5 / VS7
NovaStar Video Controller NovaPro UHD / NovaPro HD / VX16S / VX6s / VX4S-N / VX4U / VX4S / VX4 / VX1000 / VX600 / VX400s / VX2U / VX2S All-In-One Series LED Video Processor Controller
NovaStar Accessories Fiber Converter CVT-10 CVT10-S (single-mode) CVT10-M (multi-mode)/ Multifunction Card MFN300 / MFB300-B / Monitoring Card MON300 / Ambient Brightness Sensor NS060 / Fiber Converter CVT310 / CVT320 / Ambient Temperature Sensor MTH310 / Splitter DIS-300 / Fiber Converter CVT4K-S / CVT4K-M / Fiber converter CVT-Rack
NovaStar Software SmartLCT Mac Configuration RCFGX
NovaStar Software VPlayer User Manual
NovaStar Software NovaLCT LED Configuration Tool User Manual
NovaStar Software ViPlex Express
Nova Cloud Software ViPlex Handy VNNOX CARE
NovaStar Software V-Can PC Async Mode User Manual
NovaStar Software V-Can Handy Studio Mode User Manual
NovaStar Software VPlayer PC Studio Mode User Manual
NovaStar Software VPlayer Android Studio Mode User Manual
NovaStar Tech COEX VMP Win V1.2.1 SmartLCT V3.5.13 NovaLCT V5.4.7
NovaCloud Service VNNOX Media VNNOX Care
Novastar DH418 LED Receiver Card 8 HUB75E Output 256×256 Resolution
RGB data: 16 groups of RGB
Onboard: 8 standard HUB75 interfaces
Input Voltage: DC 3.3 V–5.5 V
Rated Current: 0.5 A
Rated Power Consumption: 2.5 W
Humidity: 10% RH–90% RH, non-condensing
Temperature: -25°C–+125°C
Certifications: EMC RoHS CE UL
The DH418 receiving card is a cost-effective receiving card from Novastar technology. The single led card has a maximum load of 256 × 256 pixels and supports up to 16 sets of RGB parallel data.
With 8 standard HUB75 interfaces, it offers high stability and high reliability for a wide range of environments. The hardware design and software design of the DH418 fully considers the scenario of user deployment, operation and maintenance, making deployment easier, running more stable and maintaining higher maintenance.
This receiver card comes with some highly reliable and impressive features to enhance, improve, and advance the graphical outcome of your led display screen. Briefly, you can that this one comes with everything you’d want in your led receiving card.
Support for lighting chromaticity correction
With NovaLCT and NovaCLB, the brightness of each lamp point
Corrected with chromaticity.
fast bright and dark line adjustment
Quickly bright and dark line adjustment on NovaLCT to eliminate
A gap between the light board and the light board, the box body and the box body.
3D function
With independent masters that support 3D capabilities, at NovaLCT or
Turn on the 3D function on the operator panel of the main control and set the 3D parameters.
The number causes the display screen to display a 3D effect.
Loaded:
− 192×256 (PWM IC)
− 176×256 (General Purpose IC)
Mapping function
Target box after enabling Mapping on NovaLCT
The receiving card number and network port information will be displayed, which can be clearly obtained.
Receive card location and routing method.
Receive card pre-stored screen settings
The specified picture can be set to the display on NovaLCT
The screen when the startup screen, network cable is disconnected, or when there is no video source signal.
Temperature and voltage monitoring
Can monitor its own temperature and voltage without the need for other peripherals,
The temperature and voltage of the receiving card can be viewed on the NovaLCT.
LCD module
Supports Nova’s universal 5pin LCD module. For display connection
Card temperature, voltage, single run time and total run time
between.
BER monitoring
With NovaLCT (V5.2.0 and above), the receiving card is connected
During the communication, the data loss on the transmission link is monitored.
Firmware program readback
Can read back the receiving card on NovaLCT (V5.2.0 and above)
The firmware program is saved to the local.
Configuration parameters read back
Readback card configuration parameters can be read back and saved on NovaLCT
Go to the local.
Loop backup
Increase the reliability of the series connection of the receiving card through the master-slave redundancy mechanism.
In the standby line, when one of the lines fails, the other
A line will work instantly to ensure that the display is working properly.
Configuration parameters dual backup
Save two receiving card configurations on the receiving card via NovaLCT
Parameters, one of which is used as a backup parameter.
Dual program backup
The receiving card is shipped with two applications saved in case the program is more
The upgrade caused by the new exception is stuck.
NovaStar LED Controller Card System Synchronous and Asynchronous
NovaStar Taurus Series LED Display Controller TB1-4G / TB2-4G / TB3 / TB4 / TB6 / TB8 With 4G WIFI
NovaStar LED Multi Media Player TB1-4G / TB2-4G / TB30 / TB40 / TB50 / TB60 / TB80 Nova Cloud Service T-series multimedia player MBOX600
NovaStar LED Sending Card MSD300 / MSD600
NovaStar LED Receiver Card MRV208-1 / MRV412 / MRV416 / MRV432 / MRV300 / MRV560 / MRV366 / MRV336 / MRV328 / MRV216 / MRV210 / MRV208 / MRV206 / MRV308 /MRV316 / MRV300-1
NovaStar LED Receiver Card DH7508 / DH7506 / DH7512 / DH7516-N / DH3208 / DH418 / DH426 / DH436 / DH7516 / AT20 / AT30
NovaStar LED Receiving Card A10s-Pro A10s Plus-N / A9s / A8s-N / A8 / A7s Plus / A7 / A5s Plus / A5s / A4s LED Receiving Card of Armor Series
NovaStar MCRTL4K / MCTRLR5 / MCTRL1600 / MCTRL660 PRO / MCTRL660 / MCTRL600 / MCTRL300 / MCTRL700 4K LED Sender Box
NovaStar Video Processor V1260 / V1160 / V1060 / V960 / V900 / V760 / V700 / K16 / K6S / K4S-N LED Video Processor
NovaStar Multi-picture Splicer H15 / H9 / H5 / H2 Video Splicing Processor
NovaStar HDR Master 4K Video Processor VS0 / VS1 / VS2 / VS3 / VS5 / VS7
NovaStar Video Controller NovaPro UHD / NovaPro HD / VX16S / VX6s / VX4S-N / VX4U / VX4S / VX4 / VX1000 / VX600 / VX400s / VX2U / VX2S All-In-One Series LED Video Processor Controller
NovaStar Accessories Fiber Converter CVT-10 CVT10-S (single-mode) CVT10-M (multi-mode)/ Multifunction Card MFN300 / MFB300-B / Monitoring Card MON300 / Ambient Brightness Sensor NS060 / Fiber Converter CVT310 / CVT320 / Ambient Temperature Sensor MTH310 / Splitter DIS-300 / Fiber Converter CVT4K-S / CVT4K-M / Fiber converter CVT-Rack
NovaStar Software SmartLCT Mac Configuration RCFGX
NovaStar Software VPlayer User Manual
NovaStar Software NovaLCT LED Configuration Tool User Manual
NovaStar Software ViPlex Express
Nova Cloud Software ViPlex Handy VNNOX CARE
NovaStar Software V-Can PC Async Mode User Manual
NovaStar Software V-Can Handy Studio Mode User Manual
NovaStar Software VPlayer PC Studio Mode User Manual
NovaStar Software VPlayer Android Studio Mode User Manual
NovaStar Tech COEX VMP Win V1.2.1 SmartLCT V3.5.13 NovaLCT V5.4.7
NovaCloud Service VNNOX Media VNNOX Care
Get quick response , Share your needs with us, We’ll reply you within 6 hours.
